iXtreme LT+ 3.0 คลอดแล้วครับ สำหรับรุ่นอ้วน สลิมต้องรออีกนิด
#1
Posted 25 December 2011 - 11:19 AM
[indent]LT+ 3.0 Phat BenQ/Lite-on:
Official Download
iXtreme.net Mirror
C4E’s iXtreme LT+ in association with Team Jungle & Team Xecuter
----------------------------------------------------------------
Official release of the iXtreme LT+ v3.0 for Benq and phat Liteons
- Support for topology data on AP25 enabled titles. Will correctly answer any ap25 challenge eliminating need for dae.bin to create a backup.
- No need to make new backups everytime dae.bin is updated on console
Topology Data
-------------
When ap25 was first introduced I devised a way of calculating any challenge which I called the silver bullet which I made reference to a long time ago.
This was withheld until it was absolutely necessary. It was easier to replay the fixed challenges.
With unique per console ap25 challenges it has become necessary to use the silver bullet.
A series of measurements are taken across the disk. This topology data is then used to calculate a response to any ap25 challenge.
It is very important that the drive used to create the topology data is reliable at reading discs as bad topology data equals bad ap25 responses.
Liteon drives using 0800 v3 seem to be more accurate for this purpose. Only ap25 enabled titles require topology data. Activation of ap25 on older non-ap25 games although technically possible is highly unlikely.
Currently topology data for xgd3 titles are similar and topology data from one xgd3 title will pass on another xgd3 title although this is not advisable.
Per title title topology data is best as there are slight differences between titles and newer titles could have different topology than existing ones.
I would like to wish everyone a merry xmas and a happy new year. I look forward to the challenges ahead.
Thanks go to Team Jungle for their hard work and efforts in the development process.
Thanks also go to Team Xecuter for their support to this project.[/indent]
How to burn xgd3 games with lt+ 3.0
[indent]How To Burn XGD3 Games For LT+ 3.0
BY NXTGENSYSOP
(I WILL UPDATE THIS GUIDE MORE THOROUGHLY AND WITH IMAGES AS MORE INFORMATION BECOMES AVALIABLE.)
INTRODUCTION
c4eva's iXtreme LT+ 3.0 firmware is out and is dubbed the "silver bullet" to Microsoft's anti-piracy protection.
It uses Topology Data to completely bypass all AP2.5/2.6 challenges present in ALL XGD3 games.
In order to properly burn/patch games methods will have to be slightly different until the new ABGX is released.
You will need to have a compatible iHAS drive flashed with LT BURNER MAX FIRMWARE to burn XGD3 ISOs.
If you don't have one of these drives, see this thread for a list of models, as you will need to order one:
TOOLS NEEDED
LT + 3.0
Newest imgburn
xbc v 2.9
PATCHING CURRENT GAMES
As I've said before, until the new ABGX is released, games cannot be burned as they traditionally were.
We will be using Xbox Backup Creator to inject the new Topology data for your games.
AT THE CURRENT TIME, THE TOPOLOGY DATA HAS TO BE MANUALLY RIPPED FROM LEGITIMATE COPIES OF GAMES.
You will need your game .ISO and the Topology Data (When Available).
The Topology Data will be a file titled 'median.bin'.
FOLLOW THESE STEPS:
1) Open Xbox Backup Creator v2.9.
2) Click on the tab entitled "Image Tools"
3) Change the Action to "Inject"
4) Select AP25 Sector from the list of buttons.
5) From here, you navigate to your median.bin file for your particular game and patch.
6) Burn your game with ImgBurn.
COMMON QUESTIONS
|-- Will I need to redownload my games?
|---- Only if you do not already have your .ISO on your PC. You can also re-rip your current copy if it is a 100% burn. (Not Truncated)
|-- How many "median.bin" files do I need?
|---- There will be 1 per game. At this time I don't know if they are region locked. I highly doubt so. Each file is unique to each game.
|-- Where do I get the Topology Data?
|---- They must be ripped manually. Expect to see them uploaded on the tracker when they are available. People who have drives capable of ripping games are already in the process of getting them for you.
[/indent]
#2
Posted 25 December 2011 - 11:23 AM
มันแก้อะไรมั่ง
#3
Posted 25 December 2011 - 11:30 AM
พ้อมแกะเรื่องแล้ว
#4
Posted 25 December 2011 - 11:40 AM
#5
Posted 25 December 2011 - 11:41 AM
#6
Posted 25 December 2011 - 11:43 AM
#7
Posted 25 December 2011 - 11:51 AM
แต่ผมยังไม่ได้แฟลชนะครับ เมื่อวานไปงานเลี้ยงที่ทำงานมา ^^ เพิ่งเข้าเว็บไปดูเอง ทางฝรั่งเองก็ยังไม่มีข้อมูลจากผู้ใช้จริง ๆ มากนัก เพราะเพิ่งออกร้อน ๆ เลย ใครไม่แน่ใจรอหน่วยกล้าตายก่อนก็ได้ครับ :-P
#8
Posted 25 December 2011 - 12:00 PM
#9
Posted 25 December 2011 - 12:26 PM
#10
Posted 25 December 2011 - 12:33 PM
#11
Posted 25 December 2011 - 12:34 PM
#12
Posted 25 December 2011 - 12:54 PM
#13
Posted 25 December 2011 - 01:03 PM
ส่วนตัวรออัพไม่ไหวไปโหลด skyrim ของคอมมาลองเล่นไป โอ้ว มันจ๊อดมาก
แต่คอมผมไม่แรงเท่าไหร่ กะเล่นของน้อง x นี่แหละ ทิตหน้าเอาไปอัพแน่นอน...
ตอนนี้สนเรื่องเดียว คือแผ่นที่จะเล่น นี่ผมสั่งไรท์ได้เลยไหม ...
#14
Posted 25 December 2011 - 01:23 PM
#17
Posted 25 December 2011 - 02:00 PM
#18
Posted 25 December 2011 - 02:14 PM
You will need your game .ISO and the Topology Data (When Available).
The Topology Data will be a file titled 'median.bin'.
FOLLOW THESE STEPS:
1) Open Xbox Backup Creator v2.9.
2) Click on the tab entitled "Image Tools"
3) Change the Action to "Inject"
4) Select AP25 Sector from the list of buttons.
5) From here, you navigate to your median.bin file for your particular game and patch.
6) Burn your game with ImgBurn.
ส่วนผมต้องรอแฟลชวันพรุ่งนี้ ตอนนี้มีแต่โน้ตบุ๊คแฟลชไม่ได้ T_T
#19
Posted 25 December 2011 - 02:53 PM
#20
Posted 25 December 2011 - 03:05 PM